Etiënne (tje)

Router(config)# class-map match-any <name>
Router(config)# match protocol http url “*<name>*”  <– NBAR
Router(config)# match protocol citrix

Router(config)# policy-map myqos <name>
Router(config)# class <name>
Router(config)# bandwidth <value>

OR

Router(config)# police <value> (in bytes)

Router(config)# int s0/0
Router(config-if)# service-policy <inpur/output> myqos <name>

Auto QOS

Auto qos voip [trust | fr-atm]

Weergave:

show class-map
show policy-map
show policy-map interface <interface>
show queue

Show IP protocol discovery

int fa0/0
load-interval <value>
ip nbar protocol-discovery

do show ip nbar protocol-discovery ?
do show ip nbar protocol-discovery status bit-rate top 100

Policy DSCP

Router(conf-polmap)#set dscp

NBAR:

ip nbar

Assign port-map to NBAR:
ip nbar port-map <protocol> <number>

Custom NBAR:

ip nbar custom <name> <udp/tcp> <portnummer or rage>
ip nbar custom <bit> <hex/etc> <value>

Qeueing:

Tuning WFQ:

Disable Fair Queue:

int <interface>
no fair-queue

Set number of qeue’s

int <interface>
fair-queue <number of queues> <size>

CBWFQ:
policy-map <name>
bandwidth <value>

WRED:

policy-map <name>
random-detect

NBAR config:

ip nbar protocol-discovery
show ip nbar protocol-discovery

Auto-QOS:

Auto qos voip [trust | fr-atm]

Op MLS:

Switch(config)#mls cos
Switch(config)#int f0/4
Switch(config-if)#switchport voice vlan 110
Switch(config-if)#switchport access vlan 10
Switch(config-if)#mls qos trust cos

This entry was posted on Saturday, January 2nd, 2010 at 3:19 pm and is filed under School. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.